frogDim2-2

Multifunctional 2-channel dimming actuator to dim or switch lights on/off, with 2 inputs to query buttons/switches (230 V ~). With integrated logic module, comfort and timer functions, power measurement and short circuit detection and notification (2 × 300 W).

 

Data sheet (PDF)
Downloads

Technical data
Category Frog
Article description frogDim2-2
Article number D2-2-300.01
Type of mounting Recess-mounted (in power socket)
   
Functions and power  
Inputs 2 (AC 220−240 V ~)
Outputs 2 (AC 220−240 V ~)
Outputs can be dimmed Yes (phase controlling)
Min. load LED 3W
Max. power per output 300 W @ 220−240 V ~
Suitable loads Light bulb load, electronic transformer
Unsuitable loads Inductive load
Output modes Dimmer, switch (each output adjustable)
Protection category Conforms to IP20
Certification VDE mark of conformity
Integrated logic module Yes
Integrated configuration backup Yes
Comfort and timer function Yes
Power measurement Yes
Short circuit detection and notification Yes
   
Electricity supply  
Mains voltage AC 220 −240 V ~
Mains frequency 50 / 60 Hz
Stand-by consumption < 250 mW
   
Dimensions and weight  
Dimensions (L x W x H) 53 x 48 x 21 mm
Weight 35 g
   
Network  
WLAN No
Bluetooth Bluetooth 4.2 Low Energy
Typical open field range 30 metres
   
Operation and storage  
Ambient temperature −25° to +55°C
Storage temperature −25° to +70°C
Air humidity (during operation) (Non-condensing)
   
Power connection  
Type of contact ε, MOSFET
Connection options 230 V − doorbell, lamps, power sockets, buttons, switches
Connection type Spring-type terminal (single wire)
Lead cross-section 1-1.5 mm² (rigid conductors recommended)
Stripping length 8 mm
   
Packaging  
Package size 1 piece, 10 pieces
EAN 1 piece 4260578530002
Packaging dimensions (L x W x H), 1 piece 75 x 30 x 75 mm
Weight including packaging, 1 piece 52 g
EAN 10 pieces 4260578530019
Packaging dimensions (L x W x H), 10 pieces 78 x 80 x 316 mm
Weight including packaging, 10 pieces 570 g
   

Dimensions: 53 × 48 mm | 21 mm

  • VDE approval in accordance with 
    • DIN EN 60669-1 (VDE 0632 Teil 1):2009-10; EN 60669-1:1999 + A1:2002 + A2:2008
    • DIN EN 60669-2-1 (VDE 0632-2-1):2010-03; EN 60669-2-1:2004 + A1:2009
    • DIN EN 60669-2-1/A12 (VDE 0632-2-1/A12) 2010-09; EN 60669-2-1:2004/A12:2010
    • DIN EN 60669-2-5 (VDE 0632-2-5):2017-05; EN 60669-2-5:2016
    • DIN EN 50428 (VDE 0632-400):2010-02; EN 50428:2005 + A1:2007 + A2:2009
    • IEC 60669-1:1998
    • IEC 60669-1:1998/AMD1:1999
    • IEC 60669-1:1998/AMD2:2006
    • IEC 60669-2-1:2002
    • IEC 60669-2-1:2002/AMD1:2008
    • IEC 60669-2-5:2013
Exemplary cabling

frogDim2-2
frogContact5
frogIn5-AC
frogRelay2-2
frogEntry2-3
frogAccessCom
frogDisplayCom
frogblue Frogs

frogAct1-0more
frogAct1-1more
frogRelay2-2more
frogDim1-0more
frogDim1-3more
frogDim2-2more
frogIn3-ACmore
frogIn5-ACmore
frogContact5more
frogEntry2-3more
frogblue products

Cubesmore
Network & configurationmore
Operationmore
Frogsmore

Legal notices
Subject to change. Installation and assembly of electrical equipment may only be carried out by qualified electricians. frogblue and the pictograms are registered trademarks of frogblue AG
Sales and distribution
frogblue supplies specialist electrical companies via the electrical wholesaler Sonepar Deutschland GmbH.