frogEntry2-3

Multifunctional switch actuator to control 12V electronic door openers or motorized locks featuring 3 contact inputs for determining door or buttons/switches status in 2 galvanic circuits. With integrated logic module, Featuring integrated logic module with comfort and timer functions.

Product characteristics

  • Short-circuit protection
  • Temperature cut-out (>75 °C)
  • Switch status feedback
  • Parametrisable switch on and switch off times
  • Switch on and switch off delay
  • Mains supply via power cable, no additional cabling required between frogblue modules.

Intended use

For assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth.

System information

This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.

Safety information

Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Before starting work on the device, disconnect the power supply and switch off the circuit breakers. Country-specific regulations must always be observed.

More information

Shop

Data sheet

This website uses cookies. By using this website, you consent to the setting of cookies. More info

Accept