3.5" touch screen user interface for controlling e.g. lighting, shading, heating and scenarios. With 2 inputs for querying low voltage contacts without additional supply. The frogblue "Smartphone" with touchscreen control and WLAN gateway for the flush-mounted box (230 V~). With integrated proximity sensor, brightness sensor, microphone, loudspeaker, temperature sensor, time buffer.
The “smartphone on the wall” expands our system regarding visualisation, access control, movement detection, intercoms or video displays. With its WiFi connection e.g. to a FritzBox™, it provides you with safe remote access with the frogblue HomeApp when you are out and about. The frogDisplay is puristic with a flat, minimalist design in white glass. All the functions and scenarios for intelligent living can be controlled by utilising the touch screen. It communicates directly with the frogs via Bluetooth™. At 81 x 81 mm, the frogDisplay is only as large as a light switch.
The frogDisplay provides a telephone function and an Onvif camera integration (Open Network Video Interface Forum). The frogDisplay can therefore also be utilised as an alarm system in addition to the system control function. It acts like a SIP telephone and uses, for example, the Fritzbox as a telephone station in order to initiate a telephone call or send camera images to the display with certain incidents. In addition, communication also functions the other way round: Calling up the frogDisplay makes it possible, for example, to open the door, switch on the light or to switch the alarm system to activated and/or deactivated.
Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. Country-specific regulations must be observed.